Getting water from a well at home is not a problem; however, dealing with low water pressure in a house with a well means water shortages or slow supply.
Several things may be responsible for low water pressure, and the truth is that getting your water from the well is prone to low water pressure. However, if you keep everything in place, you may enjoy using this method like other water systems.
There are several things to do when you start experiencing unexpected low water pressure in a house with a well and understanding this is the first step toward fixing it. This article will examine possible things to keep in place and take care of low water pressure or even reduce the chance of experiencing it.
What does the water pressure mean?
Water pressure refers to the gravity used to pump water and enhance water flow from your storage system to the water outlets. Water works under pressure to pass from the storage to connected pipes. This pressure is referred to as water pressure, and it is measured in PSI (pounds per square inch) in the United States.
If you use a submersible pump, the water pressure determines the water flow. It may be a real issue where the pressure falls below the required pressure. About 40-60 PSI for the submersible pump is appropriate for maintaining adequate water flow. Do not exceed 60 PSI as this may cause damage to the system.
Are you experiencing low water pressure in a house with a well? Here are a few causes:
While high water pressure can damage your plumbing, low water pressure is also a problem that needs to be resolved. There are a few reasons you may be dealing with low water pressure.
Troubleshooting low water pressure is only possible when you know what may cause the problem.
Be sure to assess the following factors:
- There is a clogged pump preventing adequate water flow
- Installed pumps are already weak and could not function optimally
- There is a partially stuck valve
- There is a corroded well pipe
- Low water pressure may be the effect of a failed components, like the pressure tank or low pressure in the captive air tank
- Bad or ineffective pressure regulator
Dealing with low water pressure in house with well
Here are the things to do when dealing with low water pressure in house with well:
Service the pressure tank
The first thing to do when dealing with a unexpected loss of water pressure in the house with a well is to service the pressure tank. Where appropriate, you may try doing this yourself; however, if you do not have the necessary experience or don’t feel comfortable taking on the task by yourself, you can reach out to an experienced plumbing company that services homes with wells.
You will know that your pressure tank needs some serving when the water pressure is below 40 or 60 psi. In such a case, there is a need to increase it.
When servicing your pressure tank, ensure that the plumber focuses extensively on things that increase the water pressure. You can also do this by following these simple rules:
o Step 1: Start by turning off the well pump circuit.
o Step 2: Test the air fill valve using the air pressure gauge. With this, you can see where the pressure lies. If you notice that the pressure is around or below 40 psi, you must adjust the pressure switch. Locate the switch around the pipe connected to your well to do this.
o Step 3: Once adjusted, go back to the circuit and test if this works by opening water through a faucet or other water outlets.
Our team recommends repeating these steps until the desired pressure is achieved.
Get a plumber to check the pipes
Another reason you may be dealing with low water pressure is clogged pipes. This is possible after tons of sediment and minerals have settled in the pipe for a long time, causing a buildup that eventually affects water flow.
If the first tip does not work, you can contact a professional plumber to assess the condition of your pipes. With this, the pipes can be unclogged, and water can flow freely.
Install a water softener
Installing a water softener is more like a way to prevent pipes from getting clogged. This will work by dispersing the solid sediment and minerals and preventing any buildup that can cause clog in the pipes.
Install a constant pressure system
One of the most effective ways to prevent water pressure from dropping is by installing a constant pressure system. This system is installed on the water line that connects the well to the multiple water lines in your home. It will effectively prevent water pressure from dropping. Once installed, ensure to constantly service it to keep it functional.
Drain the water pressure in the tank
Draining the water in the tank after offing your pump power is another way to deal with low water pressure. This will remove the remaining water in your tank through the faucet or hose bib. After that, you can then go on again to check.
How to check the water pressure
Using a pressure gauge, you can determine the water pressure. The well system has one pressure gauge located on the pipe near the pressure tank. You can detect the water pressure by looking at the pressure gauge.
Conclusion
Dealing with low water pressure in a house with a well can be annoying. Aside from the fact that it may require money to fix, low water flow frustrates other house activities. Here is why taking proper care of the system and ensuring adequate servicing is the best way to prevent this.
Taking proper care of the system will ensure that you do not need to spend so much on repairing or replacing a part. Proper maintenance and adequate servicing is the best way to prevent the issue of low water pressure from occurring.